Charlotte, NC
Office: 704-375-0776 | Fax: 704-375-2419
925 tuckaseege Rd. charlotte, nc 28208

Power-Utility Products Co.

Norfolk, VA
Office: 757-627-6800 | Fax: 757-627-5719
1416 Ballentine Blvd. norfolk, va 23504

Channel

 


General

Channels are manufactured by a series of forming dies, or rolls, which progressively cold work the strip steel into the desired channel configuration. This method produces a cross section of uniform dimensions within a tolerance of plus or minus 0.015", on outside dimensions.


Welding

Channel combinations of two or more elements are spot welded together to form various multiple combinations. The spot welds are spaced two or three inches on centers throughout the length of the multiple channel sections.


Length Information

H-STRUT Channels are produced and stocked in 10' and 20' lengths with a tolerance of + - 1/8". Other lengths are available upon request.


Loading Data

  1. When calculating load at center of span, multiply load from table by 0.5 and deflection by 0.8.
  2. When calculating beam and column loads for aluminum, multiply by 33%.

Material

Channels are produced from prime structural steel covered by the following specifications.

  • Pre-Galvanized Steel...........ASTM A-653
  • Plain Steel....................ASTM A-1011-04-SS
  • Aluminum (Type 6063T6)........ASTM B-221
  • Stainless Steel (Type 304 & 316)..ASTM A-240
Other materials and specifications available on request.

 


Finishes

All H-STRUT channels are stocked in pre-galvanized and powder coated Super-Green. Some sizes are stocked in zinc trivalent chromium, PVC or hot dipped galvanized.

  • Hot Dipped Galvanized.........ASTM A-123
  • Zinc Trivalent Chromium........ASTM B-633-85
  • Powder Coated Super-Green.....ASTM B-117
  • PVC Coating 40 ML Thickness - Available upon request

View Overview/Specs

Copyright© 2015 Power-Utility Products Co. All Rights Reserved. Powered by CC Communications, Inc.