Power-Utility Products Co provides Channel, Fittings, Hangers, Clamps and Accessories. We take pride in our ability to stock an extraordinary array of Fittings. Order Online or Call our Fitting Specialists Today with your questions or to place your orders.
Testing Methods for Strut Fittings
Fittings are tested for pull out of the channel by supporting the channel at 3" [76.2mm] spacing and applying a load perpendicular to the channel with the fitting attached according to the recommended methods and mounting torque as stated in MFMA Standards using channel meeting MFMA standards.
· Post Bases
· Channel Nuts
Pullout Test with Load on Fitting.
Pullout Test with Load on Rod
|Slip Test for Strut Fittings :: The channel nut sliding inside the channel is tested by supporting the channel by such method that the channel is stationary and applying a load parallel to the channel with the fitting attached according to the recommended methods and mounting torque as stated in MFMA Standards using channel meeting MFMA standards.|