FIG. 11 - Standard Clevis Hanger

Material:  Carbon steel, 304 (11SS) and 316 (11SX) stainless steel.

Finish:  plain, painted, electro-galvanized, hot dip galvanized.

Service:  Designed for the suspension of non-insulated, stationary pipe lines.

Approvals:  U.L. - U.L.C. listed (sizes 2½ - 8") and FM approved (⅜" - 8"). Complies with Federal Specification WWH-171-E (Type# 1), A-A-1192 A (Type# 1) and Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type# 1). 

Ordering:  Specify pipe size, figure number and finish. 
 
Notes:  Upper locknut must be tightened securely to assure proper hanger performance.  Stainless steel hangers are recommended for applications where protection from corrosive environments is needed.

"E" dimensions includes exposed rod threads beyond bottom of the hex nut. exposed rod thread dimension is equal to the diameter of the rod used.