FIG. 218 - Malleable Iron Center Load Beam Clamp

Material: Malleable iron.

Finish: Plain and electro-galvanized.

Service: Designed for the suspension of a hanger rod from the center of an I-beam.  The clamp accommodates flange widths of 2 3/8" - 7".  Flange thickness not to exceed .60 inches.  Normally used in conjunction with figure 157 extension piece.  Figure 157 provides 1" of vertical adjustment.

Approvals: When used with FIG. 157 Extension Piece. complies with Federal Specification WW-H-171-E (Type# 30), A-A 1192 A (Type# 30) and Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type# 30).

Ordering:  Specify figure number and finish.

Notes:  For complete assembly with extension piece see FIG. 229.