Horizontal Tee

Tangents: All fittings have 3" tangents (flat) at the end of curved side rails.

Fitting Class 1: Side rail flanges are 1-1/8" wide for NEMA 12B and 12C trays.  Splices and connectors use 4 screws each.

Fitting Class 2: Side rail flanges are 2" wide for NEMA Class 20A, 20B, 20C tays.  Splices and connectors use 4 screws each.

Fitting Class 3: Fitting side rail flanges are 2" wide, straight trays 2-3/8" wide for trays exceeding NEMA 20C.  Splices and connectors use 8 screws each.

Splice Plates: Tees are supplied with two pairs and Crosses three pairs of standard splice plates with hardware at no charge.