Charlotte, NC
Office: 704-375-0776 | Fax: 704-375-2419
8710 Air Park West Drive. Suite 100
Charlotte, NC 28214
 

Power Utility Products Co.

FIG. 62 - Junior Top Beam Clamp

Call to order - 704-375-0776
Material:  Ductile iron with hardened steel set screw.  304 (62SS) and 316 (62SX) stainless steel.

Finish:  Plain or electro-galvanized

Service:  Designed to attach hanger rod to the top flange of a beam or bar joist where flange thickness does not exceed 5/8 of an inch.

Approvals:  U.L. - U.L.C. listed 3/8 and 1/2 (1/2 for 4" IPS max).  FM approved for 3/8 only.  Complies with Federal Specification A-A-1192 A (Type# 19) and Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type# 19).

Ordering:  Specify rod size, material, figure number and finish.

Notes:  See MSS SP-69 for proper set screw recommendations.  Stainless steel beam clamps are recommended for corrosive environments.  Order 62D for domestic




Copyright© 2020 Power Utility Products Co. All Rights Reserved. Powered by CC Communications, Inc.  |  Privacy Policy  | Website Accessibility Statement